I've built the John Bajak's flux capacitor!

[Martian]

The pdf document for your piezo buzzer shows it to need a square wave input driver circuit. So the best you will get is click sound when you turn on the device.

I might get another one at radio shack.
How about one like this? - RadioShack® 76dB Piezo Buzzer

Are you planning to power this thing with 27 volts? It's only rated for 6-18V, so the full voltage from three 9V batteries will ruin it.

 

[Einstein]

I do believe the second piezo transducer you listed was rated to handle more than 27 volts.

Here is the original piezo transducer on the schematic still available at Radio Shack.

RadioShack® Piezo Element 1500-3000Hz

 

[dustin255]

Yeah, it can take the buzzer I got another one. It works, but as far as the claims go. Seems like it just makes you feel funny.

 

[Einstein]

Keep playing with the tuning. All you are really doing is charging and discharging the capacitor. I've read because the voltage is lower than the original 44 volts, it could take up to 45 minutes of continued operation to get it to work.

 

[dustin255]

What are your results? Why 45 minutes? Get a funny feeling when using it.

 

[Einstein]

It didn't work for me. I used the buzzer instead of the transducer.

 

[Martian]

Feel funny how? o_0

 

[dustin255]

I feel kinda like how I feel when using the HDR. But, it feels more like an uncomfortable funny feel like your gonna vomit.

 

[steven chiverton]

if the buzzer works then check the wireing again look at the schematic then look at the wiring make sure everything is ok and your batteries have power in them

 

[steven chiverton]

As of now no result. I got the power to distribute correctly but, the transducer does not make any sound. I talked to someone who is an electric engineer when building it and they said the circuit doesn't work.

So no power is moving through the circuit. The piezo tranducer I used was - http://www.mouser.com/Search/Produc...irtualkey66500000virtualkey665-AT3045TFLW110R

The buzzer works but won't work when I added it to the device. The buzzer i used was -
http://www.mouser.com/Search/ProductDetail.aspx?R=CPE-6080virtualkey51780000virtualkey490-CPE-6080

Here's my pictures please let me know what went wrong -

View attachment 3119
View attachment 3120

@Genius @TimeFlipper @Einstein @steven chiverton

I already told you what went wrong on my previous posting to this one..you didnt wire up the 3 batteries correctly..
Click on this attachment..

look at my onedrive i have home engineered tripple nine volts battery holders made in them details all given there on the set up for 27 volts dc