Another Inside the HDR Thread: Dissecting my HDR

[Einstein]

At the end closest to the lathe chuck. I rotated the chuck by hand so that that top of the iron was moving away from me.

 

[Stanley]

At the end closest to the lathe chuck. I rotated the chuck by hand so that that top of the iron was moving away from me.

thank you

 

[Stanley]

At the end closest to the lathe chuck. I rotated the chuck by hand so that that top of the iron was moving away from me.

hi Einstain do you know what kind of Oscillator Steven L Gibbs was using ?

 

[Stanley]

Looks good, I'm sure its fine, unless you want to measure the tape width and find the exact brand.

The tape in your HDR looks like the tape on my electromagnet.

He used 1 type of tape for the entire HDR

 

[Stanley]

That's where I sent it. I double checked just now and it looks like it went through.

Check your spam folder?

Or I can send it privately on this forum.

FarOut hi, can you please tell me what kind of numbers are on the diodes (PLEASE)

 

[FarOutThere]

FarOut hi, can you please tell me what kind of numbers are on the diodes (PLEASE)

The diodes are 6A10 diodes. Very cheap to get a bag of them.

 

[Stanley]

The diodes are 6A10 diodes. Very cheap to get a bag of them.

thank you FarOut

 

[steven chiverton]

i am trying to get info on how to properly wind the electromagnet

click on my picture look at my youtube videos of how i made my hdr electromagnets before i setteled on a 2 inch diameter core which never gets hot i wound between every coper layer high temperature polyimide kapton tape and finall layer of tape was high temperature silicon tape

 

[Stanley]

click on my picture look at my youtube videos of how i made my hdr electromagnets before i setteled on a 2 inch diameter core which never gets hot i wound between every coper layer high temperature polyimide kapton tape and finall layer of tape was high temperature silicon tape

you have a lot of videos i wish you could tell me which one that is.

 

[steven chiverton]

read the coments and i also explained details in the paranormalis to somewhere