The Steven Gibb's HDR Time Machine simple upgrades and fixes

Opmmur

Time Travel Professor
Messages
5,049
A post from June 1997

The Steven Gibbs Time Machine

I have had my Gibb's Time Machine the (Hyper-Dimensional Resonator) well over one year now. I have talked to Steven Gibbs by phone two times regarding my order and one time after I received the machine and his nine books. I am not here to sell anyone on buying a machine or not to buy a machine. I personally would buy the time machine again, It all depends on why a person wants the time machine in the first place. I also feel, the nine books, Steven wrote are a good starting point on the subject of time travel and are not very deep.

I feel Steven's Time Machine is real and does work as a time machine, but first it has some small and large problems. The four small problems can be very easily fixed before using the time machine. Problem #2 is the larger problem and cannot be fixed every easily.

1. The electric shock problem - The machine uses a time cord which is placed around the persons head, which has 120 volts of AC power coming out of your home wall plug. Most wall plugs in your home are fused at 15 or 20 Amps. This much electric current or power in Amps can hurt a person if the time cord had a short or cut in the wiring.

The Fix: The problem was fixed by going to Radio Shack and buying the following: One package of 3 Amp fast blow fuses and a fuse housing to hold the fuse. Next you drill a small hole in the side of the Time Machine Box the size of the fuse housing. Then place the new fuse housing in the new hole and tighten it on place. Next, cut one of the AC wires coming for the wall plug cord in half. Solder the two cut AC wires to the two connections found on the fuse housing. (NOTE: Never fix or cut the wires when the AC plug is plugged in the wall.)

2. The poor tuning - The Time Machine's next problem is a big problem, no range or tuning. There are two small knobs or dials used to control the tuning of the machine. One for the dials is the main tuning dial and the other is a main tuner dial in serials with the first dial. When tuning the dials, you must also use the rubbing plate on the machine to tune the dials. When you find the point where your fingers stick to the rubbing plate means that you are close to the tuning point your looking for, per Steven's enclosed user's guide. The main problem I have had is that the machine doesn't have the range of tuning required in order to work right. It is like trying to find the Art Bell Show through all of the thousands of AM and FM stations. There are two dials and a rubbing plate to find stations such as the Art Bell Radio Show when tuning the whole Electromagnet Bands from DC though the X-ray bands. The chances for success are not very good when there is almost no range or tuning available to find the Art Bell Show or the setting for Time Travel targets.
The Fix: I feel it needs 10 to 16 more fine tuning stages or dials for success when using the device for physical time travel, astral time travel and/or remote viewing places or dates in time.

3. The sample well and the quartz crystal - Each machine has a small 1" x .25" double terminated quartz crystal used in the sample well. Next the operator must use typing paper with their own saliva on it. The quartz crystal and saliva will help tune the time machine better. (Per the owner manual)
The Fix: A sample well for saliva and quartz crystals is used on most radionics devices when radionics healing is being done. I feel the time machine needs a larger quartz crystal. The size I use is 3" x 1" rounded on one end and pointed on the other end. I do not use the saliva sample. The clear colored larger quartz crystal can be used as focusing point for the machine energy then you try to tune the dials.

4. The heavy AC electromagnet and small bar magnet - The heavy AC electromagnet used is a good size to be used on this time machine. It is strong enough to make the machine work, but the small bar magnet is too small for the large electromagnet coil. The operations manual states that the small bar magnet must be placed on the end of the AC electromagnet so it repels north to north on the AC electromagnet iron frame. When the AC electromagnet is used with the permanent bar magnet, it vibrates at 60 cycles per second. If this small bar magnet if working right when placed on your lower chakra (the naval area). This will make your whole lower chakra vibrate at 60 cycles per second which the natural vibrations of the universe. This is also the same 60 cycles used by the great Philadelphia Experiment in 1946. (The ship that traveled in time)

The Fix: The heavy AC electromagnet works great but the small bar magnet needs to be large and stronger. I used a 2" x 2" x .5" Neodymium 35. permanent magnet. This strong Neodymium 35 magnet has 4 square inches of north surface area to use. When placing the larger and stronger magnet on your naval area, this helps to closely aline your own body to the 60 cycles natural vibrations of the universe. This should allow you to do physical time travel, astral time travel, or remote viewing to places or dates in time.

5. A time grid line or a natural energy point - If you listen to Steven Gibbs w hen he talks about energy points they are bad or good points. I feel he is right that the good and bad spots found is natural. A person should always take care when near a natural energy point because it can alter your machine's time settings. You could open doors into bad or good alternate dimensions in time that you may not be able to close again.

The Fix: The best fix is never to operate a working time device near any active time grid lines or natural energy points. If your time machine is a working machine, then it should work very well when there are no active time grid lines or natural energy points around.

I have done all the fixes listed above with the exception of number #2. When you review the time and money spent you would be better to start over and not try to add 10 to 16 more fine tuning stages or dials. In doing all but #2 repairs: The following things have happened to me using the Gibbs time machine.

1. I have never done physical time travel using Steven's time machine. I feel the chances of physical time travel are one in about one billion of it happening. (See problem #2 and why)

2. I have had success and here is my story. About a month after receiving the time machine I used it to astral project in time for about four days. One day before a full moon I projected four days into the future which was Wednesday of the following week. I was viewing my city's front page newspaper. On the front page of the Wednesday newspaper I saw a full color picture of wreckage and destruction. I was not sure if it was a bad tornado or earthquake. Well when Wednesday came I hurried to view the front page. I saw on the front page the following: It had a picture of mass destruction from a tornado, which had hit and destroyed most of a small town in Texas. This was about the first or second week of May in 1997. This machine of Steven Gibbs works well as a radionics astral time travel for remote viewing places and/or dates in time. I have also traveled to other times over the past year with the same success. For the best success you should do your traveling two days before or after the full moon or on the full moon.

PLEASE NOTE: I found that the range on my machine is about 4 to 7 days in the future, not weeks, months or years. I am not sure, but I think because of the poor tuning of the machine your own mind corrects some of the bad tuning errors. The greatest range I have gotten out of the time machine is about 4 to 7 days.

3. When your using the time machine for radionics astral time travel and/or remote viewing places or dates in time; then you must use the two dial settings and rubbing plate. Also use the large electromagnet and permanent magnet while tuning the machine to the time you want. After you complete the tuning and use of the electromagnetic magnet which is pulsing at 60 cycles per second with the time coils around your head you can turn every thing off. Next you lay down on a bed or other comfortable surface and concentrate on what your time target is. After a few minutes of concentration you will start to see and/or hear sounds. The information is extremely subtle and you still feel the pulsing of the 60 cycles per second on your lower body parts. Next, you will start to experience the following: You will start to hear voices or see pictures in your own minds eye. It is so subtle that you would tend to believe or think that it was your own mind talking to you, on your time trip. The difference between your mind talking too you and this type of Astral Time Travel is when you review the events later and all starts to come true. If it was your own mind talking to you all the things would never probably come true or happen on the date you're Astral Time Travel said it would.

4. Now is the time for you the reader to judge if this time machine is for you are not. Yes, I would buy the time machine again. You should also note that Steven Gibbs is NOT the only source for time machines and time travel information. There are many others if you look. Steven Gibbs is just the most known in the field of time travel today. In time, I feel many other people will come to be known also. Steven Gibbs will go down in history as the first person to sell time travel machines. There is also a good friend of mine Alfred Bielek who is known as the very first person to travel in time and come back to talk about his time travel. And Phil Schneider that was killed in 1996, if you do not know the names, you can look up on the Internet their names.

Professor Opmmur
 

steven chiverton

Senior Member
Messages
3,969
very well detailed professor i love it, when i built my hdr units year's ago i did what gibbs mentioned and i installed 3 amp fuses years ago and my time coil is a thick coiled rubber coated wires no flimsy thin phone cord wires inside the rubber insulation is 2 plastic insulated wires identical to house hold ac wires so theres no thin wires sticking out my switches are all ac 240 volts plastic so no metal bodies for any shorts so you wont get zapped by a metal switch and my soldered wires soldered to the back of the switches are insulated with heatshrink tubing slipped over where the wires are soldered to and my electromagnet core i increased to 2 inches diameter so it can run more than and hour and it never even gets hot so a thicker core is a must better than the 1 inch diameter core which many have had heating problems with , between every layer of double laminated wire i wound 2 or more layers of high temperature polyimide Kapton tape and at the end after winding my last layer i wound high temperature stretchable flexible mouldable silicon tape over that , and i have a switch on my electromagnet so it can be switched off to if i dont use the switch on the hdr my hdr is built better and more safety put into it so no loose wires sticking out i made pvc end plates for my hdr electromagnet and have the on off switch in one end and its non conductive body makes it safer than the metal body switches . one of my other prototype hdr units has a triple rubbing coil so one conducts ac the other conducts rerouted dc after the diodes and the third is for experiments for frequency feeding should i like to try feeding various ac frequencies into it and the output fed to a piezo or other
 

Opmmur

Time Travel Professor
Messages
5,049
When Stephen Gibbs was on the Art Bell show the first time, the next morning ,I ordered the HDR from Stephen Gibbs. About four weeks later I received it in the mail. I examined, the inner workings and thought to myself, I can improve upon this device. The post above, are the changes and modifications I made on the unit. The first one change I made was to put a fuse in the AC line so you don't get electrocuted if something shorted out and you're trying to make it work.

Professor Opmmur
 

Keedharuth1948

New Member
Messages
23
A post from June 1997

The Steven Gibbs Time Machine

I have had my Gibb's Time Machine the (Hyper-Dimensional Resonator) well over one year now. I have talked to Steven Gibbs by phone two times regarding my order and one time after I received the machine and his nine books. I am not here to sell anyone on buying a machine or not to buy a machine. I personally would buy the time machine again, It all depends on why a person wants the time machine in the first place. I also feel, the nine books, Steven wrote are a good starting point on the subject of time travel and are not very deep.

I feel Steven's Time Machine is real and does work as a time machine, but first it has some small and large problems. The four small problems can be very easily fixed before using the time machine. Problem #2 is the larger problem and cannot be fixed every easily.

1. The electric shock problem - The machine uses a time cord which is placed around the persons head, which has 120 volts of AC power coming out of your home wall plug. Most wall plugs in your home are fused at 15 or 20 Amps. This much electric current or power in Amps can hurt a person if the time cord had a short or cut in the wiring.

The Fix: The problem was fixed by going to Radio Shack and buying the following: One package of 3 Amp fast blow fuses and a fuse housing to hold the fuse. Next you drill a small hole in the side of the Time Machine Box the size of the fuse housing. Then place the new fuse housing in the new hole and tighten it on place. Next, cut one of the AC wires coming for the wall plug cord in half. Solder the two cut AC wires to the two connections found on the fuse housing. (NOTE: Never fix or cut the wires when the AC plug is plugged in the wall.)

2. The poor tuning - The Time Machine's next problem is a big problem, no range or tuning. There are two small knobs or dials used to control the tuning of the machine. One for the dials is the main tuning dial and the other is a main tuner dial in serials with the first dial. When tuning the dials, you must also use the rubbing plate on the machine to tune the dials. When you find the point where your fingers stick to the rubbing plate means that you are close to the tuning point your looking for, per Steven's enclosed user's guide. The main problem I have had is that the machine doesn't have the range of tuning required in order to work right. It is like trying to find the Art Bell Show through all of the thousands of AM and FM stations. There are two dials and a rubbing plate to find stations such as the Art Bell Radio Show when tuning the whole Electromagnet Bands from DC though the X-ray bands. The chances for success are not very good when there is almost no range or tuning available to find the Art Bell Show or the setting for Time Travel targets.
The Fix: I feel it needs 10 to 16 more fine tuning stages or dials for success when using the device for physical time travel, astral time travel and/or remote viewing places or dates in time.

3. The sample well and the quartz crystal - Each machine has a small 1" x .25" double terminated quartz crystal used in the sample well. Next the operator must use typing paper with their own saliva on it. The quartz crystal and saliva will help tune the time machine better. (Per the owner manual)
The Fix: A sample well for saliva and quartz crystals is used on most radionics devices when radionics healing is being done. I feel the time machine needs a larger quartz crystal. The size I use is 3" x 1" rounded on one end and pointed on the other end. I do not use the saliva sample. The clear colored larger quartz crystal can be used as focusing point for the machine energy then you try to tune the dials.

4. The heavy AC electromagnet and small bar magnet - The heavy AC electromagnet used is a good size to be used on this time machine. It is strong enough to make the machine work, but the small bar magnet is too small for the large electromagnet coil. The operations manual states that the small bar magnet must be placed on the end of the AC electromagnet so it repels north to north on the AC electromagnet iron frame. When the AC electromagnet is used with the permanent bar magnet, it vibrates at 60 cycles per second. If this small bar magnet if working right when placed on your lower chakra (the naval area). This will make your whole lower chakra vibrate at 60 cycles per second which the natural vibrations of the universe. This is also the same 60 cycles used by the great Philadelphia Experiment in 1946. (The ship that traveled in time)

The Fix: The heavy AC electromagnet works great but the small bar magnet needs to be large and stronger. I used a 2" x 2" x .5" Neodymium 35. permanent magnet. This strong Neodymium 35 magnet has 4 square inches of north surface area to use. When placing the larger and stronger magnet on your naval area, this helps to closely aline your own body to the 60 cycles natural vibrations of the universe. This should allow you to do physical time travel, astral time travel, or remote viewing to places or dates in time.

5. A time grid line or a natural energy point - If you listen to Steven Gibbs w hen he talks about energy points they are bad or good points. I feel he is right that the good and bad spots found is natural. A person should always take care when near a natural energy point because it can alter your machine's time settings. You could open doors into bad or good alternate dimensions in time that you may not be able to close again.

The Fix: The best fix is never to operate a working time device near any active time grid lines or natural energy points. If your time machine is a working machine, then it should work very well when there are no active time grid lines or natural energy points around.

I have done all the fixes listed above with the exception of number #2. When you review the time and money spent you would be better to start over and not try to add 10 to 16 more fine tuning stages or dials. In doing all but #2 repairs: The following things have happened to me using the Gibbs time machine.

1. I have never done physical time travel using Steven's time machine. I feel the chances of physical time travel are one in about one billion of it happening. (See problem #2 and why)

2. I have had success and here is my story. About a month after receiving the time machine I used it to astral project in time for about four days. One day before a full moon I projected four days into the future which was Wednesday of the following week. I was viewing my city's front page newspaper. On the front page of the Wednesday newspaper I saw a full color picture of wreckage and destruction. I was not sure if it was a bad tornado or earthquake. Well when Wednesday came I hurried to view the front page. I saw on the front page the following: It had a picture of mass destruction from a tornado, which had hit and destroyed most of a small town in Texas. This was about the first or second week of May in 1997. This machine of Steven Gibbs works well as a radionics astral time travel for remote viewing places and/or dates in time. I have also traveled to other times over the past year with the same success. For the best success you should do your traveling two days before or after the full moon or on the full moon.

PLEASE NOTE: I found that the range on my machine is about 4 to 7 days in the future, not weeks, months or years. I am not sure, but I think because of the poor tuning of the machine your own mind corrects some of the bad tuning errors. The greatest range I have gotten out of the time machine is about 4 to 7 days.

3. When your using the time machine for radionics astral time travel and/or remote viewing places or dates in time; then you must use the two dial settings and rubbing plate. Also use the large electromagnet and permanent magnet while tuning the machine to the time you want. After you complete the tuning and use of the electromagnetic magnet which is pulsing at 60 cycles per second with the time coils around your head you can turn every thing off. Next you lay down on a bed or other comfortable surface and concentrate on what your time target is. After a few minutes of concentration you will start to see and/or hear sounds. The information is extremely subtle and you still feel the pulsing of the 60 cycles per second on your lower body parts. Next, you will start to experience the following: You will start to hear voices or see pictures in your own minds eye. It is so subtle that you would tend to believe or think that it was your own mind talking to you, on your time trip. The difference between your mind talking too you and this type of Astral Time Travel is when you review the events later and all starts to come true. If it was your own mind talking to you all the things would never probably come true or happen on the date you're Astral Time Travel said it would.

4. Now is the time for you the reader to judge if this time machine is for you are not. Yes, I would buy the time machine again. You should also note that Steven Gibbs is NOT the only source for time machines and time travel information. There are many others if you look. Steven Gibbs is just the most known in the field of time travel today. In time, I feel many other people will come to be known also. Steven Gibbs will go down in history as the first person to sell time travel machines. There is also a good friend of mine Alfred Bielek who is known as the very first person to travel in time and come back to talk about his time travel. And Phil Schneider that was killed in 1996, if you do not know the names, you can look up on the Internet their names.

Professor Opmmur
It is quite a good and memorable experience I am sure you have learn a lot from them .
 

steven chiverton

Senior Member
Messages
3,969
all gibbs designs in his book have not all been tested in fact theres no testimonials for many and the ones that have coper wire stuck to the ends or quartz crystals dont work as they are non conductors so the only thing that may conduct is the human aura so all gibbs designs that have coper coils glued to the ends of double terminated quartz crystals are false they cant work and if they wrap the coper coil around the crystals without glueing it to the ends, the magnetic field through the nonconductive quartz dose nothing either compared to an iron peace which acts as a em or flux concentrator
 

Einstein

Temporal Engineer
Messages
5,414
all gibbs designs in his book have not all been tested in fact theres no testimonials for many and the ones that have coper wire stuck to the ends or quartz crystals dont work as they are non conductors so the only thing that may conduct is the human aura so all gibbs designs that have coper coils glued to the ends of double terminated quartz crystals are false they cant work and if they wrap the coper coil around the crystals without glueing it to the ends, the magnetic field through the nonconductive quartz dose nothing either compared to an iron peace which acts as a em or flux concentrator
I totally agree with your statements. I have studied the use of quartz in electronic components extensively. Quartz will generate an electrical pulse or spark when exposed to mechanical, gravitational, or pulsed electrical fields. Quartz is immune to any type of magnetic influence at all.
 

steven chiverton

Senior Member
Messages
3,969
the link above doesn't work quartz in thin wafers may work but as a double terminated chunk in steven gibbs designs dose nothing. however, I've found in my experiments that modified rochelle salt crystals dose more than what quartz dose and Rochelle salt crystals amplify the human aura better than what was said many decades ago that quartz dose in fact in the dark the aura fields about a few inches surrounding my hands which is incredible, and it interacts with the fast particles we see in the dark easily like a repulsion feild and im sure they are a key in some things
 

Top