adamleon97
Dick Pic Sender
- Messages
- 28
According to most skeptics on here, our Time Travel team has neither come up with any mathematics of value or claim that we have no idea of what we are doing for the development of our technologies. I have written out our plan removing the formulas and mathematics involved for the sole purpose of allowing others on this site to see our progress and our plans.
As I'm also sure everyone is aware of, the majority of individuals here do not have any sort of formal education so I will try not to refer to terms of academia but rather concepts easier to understand.
1. Creation of a Dyson Swarm
We would need to create a Dyson Swarm for several reasons. The main reason for the creation of a Dyson Swarm is because of the requirement of energy for the ability of space-time manipulation. After doing the math, we would need roughly 10% of the sun's output (Relative to output per second) in order to have enough energy possible.
The energy requirement is equal to 3.864 10^25 (Orders of magnitude for those that don't understand) Watts which compared to the world's largest power plant that generates a total of 5 X 10^9 Watts is far more than humanity is capable of having produced in our entire existence in just one second.
(For those that don't understand orders of magnitude, I'll write out the full number comparison.)
Total Energy Needed Per Second: 38,640,000,000,000,000,000,000,000,000 Watts
Total Energy Output of the World's Production Per Second: 30,448,055,555,556 Watts
Looking at the numbers above, you can see the world's output pales in comparison to anything we would need. On the Kardashev Scale relative to energy production, we aren't even a Type I Civilization (Classifiable a Type 0). That's where our first step is going to be. Producing the Energy required. After a long enough debate we realized a Dyson Swarm would be the best answer to our problem of Energy Production.
A Dyson Swarm is essentially Panels orbiting around the Sun that can either redirect the energy output into photovoltaic energy (Solar Panels) or can redirect the energy to be usable.
We would need to ultimately create a Dyson Swarm capable of covering 10% the Sun's Output per second by gathering the materials to create enough panels for the surface area of 10% of the sun. Mathematically that's 6.09 X 10^12 Square Km or in normal numbers 6,090,000,000,000 Square Kilometers just to make the minimum requirement. (12,000 times the surface area of the Earth)
2. Gathering the Materials for the Dyson Swarm
So how do we plan on gather the materials necessary to produce a Dyson swarm of that magnitude? That's quite easy.
Our proposition? Blowing up Mercury. (Yes the Planet)
Mercury has a very small Gravitational Field, Contains No atmosphere and is essentially a huge rock of material. It is also primarily made up of an Iron Compound called Hematite and though Hematite is worthless in modern society with the development of other materials, its abundance is what we're after. For those that don't know, Hematite was primarily used as Primitive Mirrors in early society before being replaced by better materials.
Hematite could be used to create panels with the thickness equivalent to Aluminum Foil placed in orbit around the sun. After the math is done, we find that there is enough material on Mercury at the width of .016 MM (Thickness of Aluminum Foil) for Hematite to cover roughly 10% of the Surface Area of the Sun.
Utilizing the Hematite Panels, we could redirect the photons and the energy into a MASER capable of sending that energy back in a continuous stream to Earth to grant the energy required.
The Main issue is that we realize the material we could gather from Mercury is still is not enough. Even though we could theoretically cover 10% the Surface of the Sun with this Amount, we would need to place the panels in orbital Distance ultimately changing the Surface area required. Considering the Panels would be further away from the sun than on the surface, we would need the surface area of the orbital distance to gather the necessary photon energy.
Ultimately we would need to gather materials from more than just Mercury but that's just easily solvable by just utilizing asteroids in the asteroid belt.
3. Creating the equipment to develop a Dyson Swarm
How do we plan on mining Mercury and Asteroids for the materials? That's a bit different and requires mechanical and programming explanation.
Due to Mercury’s low gravitational field and no atmosphere, it’s entirely feasible to make a basic ship to mine and and use self-replication to generate and produce more panels. A single panel could be constructed on earth and then sent to space to begin replicating itself with the material on Mercury. It would be fairly easy to create space-craft with the ability to leave the gravitational field of mercury due to its size and grow exponentially in production. Once the materials are depleted, the production can stop and drift in orbit from the position of mercury. As Mercury decreases in size due to mining, so will its gravitational pull and so the production will speed up with each new panel along with each new panel production.
While this is continuing, a second system could be sent to the asteroid belt to produce panels that would be necessary and required for the additional surface area needed and so the production speed for both systems would remain in the same time of production of just one development.
Ultimately requiring only two self-replicating space-craft pre-programmed to mine and create from the materials immediately available to create a Dyson Swarm. If we had the money, we could begin working on these things immediately.
The hardest part would be the production of a Maser facility to be placed along the use-to-be orbit of Mercury in alignment with the redirection of the panels to send the energy in a focused beam back to the Earth. It would require a relatively large ship (Equivalent to Von Braun's Station theorized in the 50’s) but the technology is possible and easy to do in today’s society.
Given that we could use the replicative mining tools to gather the material required for the MASER and that it would be built in the zero gravity of space, its production would be far quicker and easier than built on the earth of using the cost of earthly materials. So we would only have to pay for the initial production for the two replicative ships and panels. (A cost that’s still roughly 4 Billion USD)
4. Creating a Kugelblitz
Using the energy from the Dyson Swarm after its creation would grant enough to create a Kugelblitz. This is what we require to manipulate space-time.
A kugelblitz is just a fancy name for a Black Hole (a singularity) created using concentrated energy instead of concentrated mass. This is exactly what we would need.
A kugelblitz was also often theorized to create a kugelblitz drive. Due to relativistic properties we are aware that M= E/C^2. Considering a Kugelblitz is the most efficient form of converting mass into energy. With just the mass of the solar system alone, we could use a kugelblitz to convert that to energy that would last the entire human race longer than the Universe will ever exist. (Eventual heat death) In essence, after the creation of a kugelblitz, we would be able to generate an infinite amount of required energy.
However, considering a black hole essentially distorts space-time due to its gravitational well in reference to the mathematical singularity. We will be using its production to perform faster than light travel.
If two micro-singularities stayed in orbit around each other, they would prevent the outflux of hawking radiation along with creating a sufficient electromagnetic field preventing spaghettification due to gravity. This would allow an individual to ride in a bubble creating warped space time and achieve faster than light movement (As the only thing to move faster than light is gravity) Propelling someone to the past.
5. Calculating for Space-Time Movement
What most people don’t understand or take into account is fourth dimensional movement. So what is it and how do we calculate for it?
A day in the future is in the middle of space. A day in the past is the same distance away but opposite in movement. Don’t understand? I’ll explain.
24 hours ago, due to the planet's movement, you were technically in the middle of a completely different area of space. If you traveled through time, you would end up in the middle of space due to the earth being in a completely different area as well.
To account for this, we would require all the variables of movement. We would have to calculate for all the variables that contribute to our movement in space-time.
This is relatively easy (I made a pun).
We would need to calculate for the following variables.
The movement of Earth's Rotation, The Orbital rotation around the Sun, the Movement of the Sun, the movement of our galaxy, the movement of the rotation of the universe along with the movement of the expansion of the universe.
As I am tired and have sat down to write all of these parts so far, I will leave the rest as just a “Join the team to find out how we did it”.
6. Gathering the Funding
All it comes down to is the money.
We have begun creating a brand by creating shows on YouTube to build up a following. After a significant following is had then we will begin the creation of the corporation. Currently we are busy filming and writing the shows and could always use more actors and people to join and assist us in growing our corporation.
We don’t want anyone’s money, we just want to work and develop or technologies and so will create a corporation to generate the funds to do that. As I am a business administration major, that remains relatively easy.
BE SURE TO JOIN OUR TIME TRAVEL TEAM TO FIND OUT MORE, GET TO KNOW MORE, ASSIST IN CREATING TIME TRAVEL DEVICES ALONG WITH DEVELOPING A NEW AGE OF TECHNOLOGY AND DEVELOPMENT.
Our Website: Time Travel Researchers
Our Discord: Discord - Free voice and text chat for gamers
As I'm also sure everyone is aware of, the majority of individuals here do not have any sort of formal education so I will try not to refer to terms of academia but rather concepts easier to understand.
1. Creation of a Dyson Swarm
We would need to create a Dyson Swarm for several reasons. The main reason for the creation of a Dyson Swarm is because of the requirement of energy for the ability of space-time manipulation. After doing the math, we would need roughly 10% of the sun's output (Relative to output per second) in order to have enough energy possible.
The energy requirement is equal to 3.864 10^25 (Orders of magnitude for those that don't understand) Watts which compared to the world's largest power plant that generates a total of 5 X 10^9 Watts is far more than humanity is capable of having produced in our entire existence in just one second.
(For those that don't understand orders of magnitude, I'll write out the full number comparison.)
Total Energy Needed Per Second: 38,640,000,000,000,000,000,000,000,000 Watts
Total Energy Output of the World's Production Per Second: 30,448,055,555,556 Watts
Looking at the numbers above, you can see the world's output pales in comparison to anything we would need. On the Kardashev Scale relative to energy production, we aren't even a Type I Civilization (Classifiable a Type 0). That's where our first step is going to be. Producing the Energy required. After a long enough debate we realized a Dyson Swarm would be the best answer to our problem of Energy Production.
A Dyson Swarm is essentially Panels orbiting around the Sun that can either redirect the energy output into photovoltaic energy (Solar Panels) or can redirect the energy to be usable.
We would need to ultimately create a Dyson Swarm capable of covering 10% the Sun's Output per second by gathering the materials to create enough panels for the surface area of 10% of the sun. Mathematically that's 6.09 X 10^12 Square Km or in normal numbers 6,090,000,000,000 Square Kilometers just to make the minimum requirement. (12,000 times the surface area of the Earth)
2. Gathering the Materials for the Dyson Swarm
So how do we plan on gather the materials necessary to produce a Dyson swarm of that magnitude? That's quite easy.
Our proposition? Blowing up Mercury. (Yes the Planet)
Mercury has a very small Gravitational Field, Contains No atmosphere and is essentially a huge rock of material. It is also primarily made up of an Iron Compound called Hematite and though Hematite is worthless in modern society with the development of other materials, its abundance is what we're after. For those that don't know, Hematite was primarily used as Primitive Mirrors in early society before being replaced by better materials.
Hematite could be used to create panels with the thickness equivalent to Aluminum Foil placed in orbit around the sun. After the math is done, we find that there is enough material on Mercury at the width of .016 MM (Thickness of Aluminum Foil) for Hematite to cover roughly 10% of the Surface Area of the Sun.
Utilizing the Hematite Panels, we could redirect the photons and the energy into a MASER capable of sending that energy back in a continuous stream to Earth to grant the energy required.
The Main issue is that we realize the material we could gather from Mercury is still is not enough. Even though we could theoretically cover 10% the Surface of the Sun with this Amount, we would need to place the panels in orbital Distance ultimately changing the Surface area required. Considering the Panels would be further away from the sun than on the surface, we would need the surface area of the orbital distance to gather the necessary photon energy.
Ultimately we would need to gather materials from more than just Mercury but that's just easily solvable by just utilizing asteroids in the asteroid belt.
3. Creating the equipment to develop a Dyson Swarm
How do we plan on mining Mercury and Asteroids for the materials? That's a bit different and requires mechanical and programming explanation.
Due to Mercury’s low gravitational field and no atmosphere, it’s entirely feasible to make a basic ship to mine and and use self-replication to generate and produce more panels. A single panel could be constructed on earth and then sent to space to begin replicating itself with the material on Mercury. It would be fairly easy to create space-craft with the ability to leave the gravitational field of mercury due to its size and grow exponentially in production. Once the materials are depleted, the production can stop and drift in orbit from the position of mercury. As Mercury decreases in size due to mining, so will its gravitational pull and so the production will speed up with each new panel along with each new panel production.
While this is continuing, a second system could be sent to the asteroid belt to produce panels that would be necessary and required for the additional surface area needed and so the production speed for both systems would remain in the same time of production of just one development.
Ultimately requiring only two self-replicating space-craft pre-programmed to mine and create from the materials immediately available to create a Dyson Swarm. If we had the money, we could begin working on these things immediately.
The hardest part would be the production of a Maser facility to be placed along the use-to-be orbit of Mercury in alignment with the redirection of the panels to send the energy in a focused beam back to the Earth. It would require a relatively large ship (Equivalent to Von Braun's Station theorized in the 50’s) but the technology is possible and easy to do in today’s society.
Given that we could use the replicative mining tools to gather the material required for the MASER and that it would be built in the zero gravity of space, its production would be far quicker and easier than built on the earth of using the cost of earthly materials. So we would only have to pay for the initial production for the two replicative ships and panels. (A cost that’s still roughly 4 Billion USD)
4. Creating a Kugelblitz
Using the energy from the Dyson Swarm after its creation would grant enough to create a Kugelblitz. This is what we require to manipulate space-time.
A kugelblitz is just a fancy name for a Black Hole (a singularity) created using concentrated energy instead of concentrated mass. This is exactly what we would need.
A kugelblitz was also often theorized to create a kugelblitz drive. Due to relativistic properties we are aware that M= E/C^2. Considering a Kugelblitz is the most efficient form of converting mass into energy. With just the mass of the solar system alone, we could use a kugelblitz to convert that to energy that would last the entire human race longer than the Universe will ever exist. (Eventual heat death) In essence, after the creation of a kugelblitz, we would be able to generate an infinite amount of required energy.
However, considering a black hole essentially distorts space-time due to its gravitational well in reference to the mathematical singularity. We will be using its production to perform faster than light travel.
If two micro-singularities stayed in orbit around each other, they would prevent the outflux of hawking radiation along with creating a sufficient electromagnetic field preventing spaghettification due to gravity. This would allow an individual to ride in a bubble creating warped space time and achieve faster than light movement (As the only thing to move faster than light is gravity) Propelling someone to the past.
5. Calculating for Space-Time Movement
What most people don’t understand or take into account is fourth dimensional movement. So what is it and how do we calculate for it?
A day in the future is in the middle of space. A day in the past is the same distance away but opposite in movement. Don’t understand? I’ll explain.
24 hours ago, due to the planet's movement, you were technically in the middle of a completely different area of space. If you traveled through time, you would end up in the middle of space due to the earth being in a completely different area as well.
To account for this, we would require all the variables of movement. We would have to calculate for all the variables that contribute to our movement in space-time.
This is relatively easy (I made a pun).
We would need to calculate for the following variables.
The movement of Earth's Rotation, The Orbital rotation around the Sun, the Movement of the Sun, the movement of our galaxy, the movement of the rotation of the universe along with the movement of the expansion of the universe.
As I am tired and have sat down to write all of these parts so far, I will leave the rest as just a “Join the team to find out how we did it”.
6. Gathering the Funding
All it comes down to is the money.
We have begun creating a brand by creating shows on YouTube to build up a following. After a significant following is had then we will begin the creation of the corporation. Currently we are busy filming and writing the shows and could always use more actors and people to join and assist us in growing our corporation.
We don’t want anyone’s money, we just want to work and develop or technologies and so will create a corporation to generate the funds to do that. As I am a business administration major, that remains relatively easy.
BE SURE TO JOIN OUR TIME TRAVEL TEAM TO FIND OUT MORE, GET TO KNOW MORE, ASSIST IN CREATING TIME TRAVEL DEVICES ALONG WITH DEVELOPING A NEW AGE OF TECHNOLOGY AND DEVELOPMENT.
Our Website: Time Travel Researchers
Our Discord: Discord - Free voice and text chat for gamers