Einstein
Temporal Engineer
- Messages
- 5,399
At the end closest to the lathe chuck. I rotated the chuck by hand so that that top of the iron was moving away from me.
thank youAt the end closest to the lathe chuck. I rotated the chuck by hand so that that top of the iron was moving away from me.
hi Einstain do you know what kind of Oscillator Steven L Gibbs was using ?At the end closest to the lathe chuck. I rotated the chuck by hand so that that top of the iron was moving away from me.
He used 1 type of tape for the entire HDRLooks good, I'm sure its fine, unless you want to measure the tape width and find the exact brand.
The tape in your HDR looks like the tape on my electromagnet.
FarOut hi, can you please tell me what kind of numbers are on the diodes (PLEASE)That's where I sent it. I double checked just now and it looks like it went through.
Check your spam folder?
Or I can send it privately on this forum.
FarOut hi, can you please tell me what kind of numbers are on the diodes (PLEASE)
thank you FarOutThe diodes are 6A10 diodes. Very cheap to get a bag of them.
click on my picture look at my youtube videos of how i made my hdr electromagnets before i setteled on a 2 inch diameter core which never gets hot i wound between every coper layer high temperature polyimide kapton tape and finall layer of tape was high temperature silicon tapei am trying to get info on how to properly wind the electromagnet
you have a lot of videos i wish you could tell me which one that is.click on my picture look at my youtube videos of how i made my hdr electromagnets before i setteled on a 2 inch diameter core which never gets hot i wound between every coper layer high temperature polyimide kapton tape and finall layer of tape was high temperature silicon tape