🧲 Schematic My HDR Project

[steven chiverton]

one of the few things i can do good, is read quickly lol

hm i noticed if you flick through the pages fast enough some words pop out and you can spot them is it trying to tell me a secret lol

 

[TheMedic2001]

i've uploaded the book into the forums time machine plans wow you wouldn't believe how many ways you can time travel without a hdr and more than that to . so the greys were created by the mothmen and the men in black who's created move awkwardly because they wear wrap around human skin and more information than just time travel and time machines that's for sure

I'll try to find it

 

[steven chiverton]

As some of you may know, I've been working on building a Hyper Dimensional Resonator. But I'm not quite satisfied that I have it correctly reproduced so far. I have some pictures to show my progress so far.

File Den

In the first picture you'll notice I color coded the plugs on the electromagnet connections so that the electromagnet produces a north pole field.

File Den

In the second picture I used a strain relief where the cord goes into the case. Also the cord itself was just an extension cord with a molded plug on the end. I just cut off the receptacle end and discarded it. This was cheaper this way because the extension cord was only $2.00 as opposed to $4.50 if I purchased the cord and plug separately as Steven Gibbs does with his design.

File Den

In this picture you will see that I have everything laid out just as Steven does. The knobs are very similar to his design but not exact. I couldn't find the exact knobs anywhere. The case is the same one as Steven uses. I got this one from DigiKey. The case is made by Keystone if anyone is interested. It is a very good and solidly designed case.

File Den

In this picture I deviated slightly from Steven's design. I don't like to put things together with tape. So everything is either glued or bolted down. The caduceus coil was not very easy to construct. It took the better part of a day to complete. The coil itself is the required 7.8 centimeter diameter. I encased the coil in resin to hold it together. It is permanently epoxied in place. The witness well I have just recently discovered is not correct. I found someone on the web that describes the witness well as having twelve turns of wire at the bottom, six turns of wire in the middle, and twelve turns of wire at the top. So I have to redo that. I used heat shrink tubing to insulate the wire connections that go to the AC cord coming into the case. Also I made special standoffs epoxied to the case that hold the circuit board in place with screws. So nothing can move around inside the case. This was not an easy project to do. But I like to fabricate things. So this is right down my alley.

these links dont work it takes you to a video stripe page where something else is there

 

[Einstein]

As some of you may know, I've been working on building a Hyper Dimensional Resonator. But I'm not quite satisfied that I have it correctly reproduced so far. I have some pictures to show my progress so far.

File Den

In the first picture you'll notice I color coded the plugs on the electromagnet connections so that the electromagnet produces a north pole field.

File Den

In the second picture I used a strain relief where the cord goes into the case. Also the cord itself was just an extension cord with a molded plug on the end. I just cut off the receptacle end and discarded it. This was cheaper this way because the extension cord was only $2.00 as opposed to $4.50 if I purchased the cord and plug separately as Steven Gibbs does with his design.

File Den

In this picture you will see that I have everything laid out just as Steven does. The knobs are very similar to his design but not exact. I couldn't find the exact knobs anywhere. The case is the same one as Steven uses. I got this one from DigiKey. The case is made by Keystone if anyone is interested. It is a very good and solidly designed case.

File Den

In this picture I deviated slightly from Steven's design. I don't like to put things together with tape. So everything is either glued or bolted down. The caduceus coil was not very easy to construct. It took the better part of a day to complete. The coil itself is the required 7.8 centimeter diameter. I encased the coil in resin to hold it together. It is permanently epoxied in place. The witness well I have just recently discovered is not correct. I found someone on the web that describes the witness well as having twelve turns of wire at the bottom, six turns of wire in the middle, and twelve turns of wire at the top. So I have to redo that. I used heat shrink tubing to insulate the wire connections that go to the AC cord coming into the case. Also I made special standoffs epoxied to the case that hold the circuit board in place with screws. So nothing can move around inside the case. This was not an easy project to do. But I like to fabricate things. So this is right down my alley.

these links dont work it takes you to a video stripe page where something else is there

Just go to the next page. Fileden went out of business. I had to find another file sharing provider.

 

[Rossco78]

Don't plan on using this device for anything other than show. He claims its just a hobby. Enjoy wasting your $100 dollars on nothing.

 

[steven chiverton]

all the time machines in steven gibbs reports theres no information or testimonials of any of them actually working except the hdr and stm which is one case only and one other device,

 

[TimeFlipper]

all the time machines in steven gibbs reports theres no information or testimonials of any of them actually working except the hdr and stm which is one case only and one other device,

Cobber, was there any real proof that the "one case" you mentioned actually worked?..

 

[NaturalPhilosopher]

all the time machines in steven gibbs reports theres no information or testimonials of any of them actually working except the hdr and stm which is one case only and one other device,

there's a few replications that worked
the more complex designs he has are pretty expensive.

 

[mullac998]

there's a few replications that worked
the more complex designs he has are pretty expensive.

can we talk or are you gonna ignore me?

 

[TimeFlipper]

there's a few replications that worked
the more complex designs he has are pretty expensive.

Any real proof of them working, bro?