Another Inside the HDR Thread: Dissecting my HDR

ive suspected scalar waves may play some parts in the time travel stuff or other unknown things ive built 2 scalar generators and feed a 56-57 hetrz square wave generators output into the coil input and electric motors positive input and it remotely effects my usb plug in and plug out audio sounds i had my pc doing a full scan to and the counter for the scan was rising for ages then started going down instead then up again then it fished ahead of the 37 minutes left so after runing it a few times i put it away and the scan timer completed the 37 minutes left in less than 2 minutes
 
dont use iron i tried that and it dident work use mild steel bars 2 inches in diameter this enables it to run hours and never get hot

I got my info from from HDRKid. But I did some research on it and it seems pure iron would be the way to go. Pig Iron has a lot of carbon mixed in as does mild steel. The carbon promotes heating. In the literature on iron I found the pure variety is also preferred to be used in transformers too. But here in the USA Obama shut down all the steel mills. So it was virtually impossible to obtain. I don't think you realized that by using 2 inch steel, you had to use more wire too. The larger coil would create more impedance thus preventing heating that way. Also you never mention the public power supply where you live is twice the voltage of what the HDR uses. I suspect that the iron you used was either pig iron or cast iron. Both types are not suitable because of the carbon content. I never did find a pure iron supplier though. But in the past it was readily available.
 
I myself time traveled using two of Steven Gibbs HDR's. Currently, I've got his experimental 2004 model and a 1995 model. Knowing full well if Steve was going die one day, I'd better get two of them, definitely a collectors item, since Steve's passing. So, I kind of have the best of both worlds soon to be a collectors model and for time traveling nonetheless. Steve talks about scalar alot 20 or so years ago. It too got me thinking how can I have the access scalar field with non-interference?

A year ago, I did 8 months of research non-stop using and reading all kinds of devices. About two years ago, my SE5 transported me to AREA 51...But not without "patience on my part. It taken myself 24/7 for two weeks of broadcasting my custom programming, I didn't know if it was dream or not! But the tar pavement in front of the hangar was reflecting the heat, it was very realistic. I won't both you with all the details. I want to go back again to gain a little more understanding of Area 51 with focused intentions ,while visiting there!

Still not quite enough for me. I wanted to be able to work in a huge field of scalar as a back drop, be it as it may. I recorded my TimeTravel programming on a blank credit card size plastic and programmed all my "word tunings" both positive and negative in small place and I place it in my wallet. I have purchased nearly two years ago a CHIO broadcasting device from Don Paris It works independently from the SE-5 itself or with it. Mostly for convenience sake on my part . Doing it this way, I could use my machine for other things. But even though Don Paris's device physically taken me to that secret location, I needed more access to scalar field. SE-5 1000 has inside on its board a helix wound wire powered by 12 bolts and the information is sent to that. Don never in his 50 years of having the SE-5 never venture to time traveling with it~!

Of course, the HDR supposively creates and uses scalar field using 7 cc copper coil under the rub plate, when and where you can. It is also cursed as not being exact in a year, month or day of where your desiring, When going to either the past, present or future timelines. It's a crap shoot for time traveling. I also time traveled using this device quite a few times and like HDR kid, the vortex comes out of nowhere and transports me to another dimension along with my car! I've read about it and imagine scenarios, but I never thought in a million years I was going to be an unwilling participate. It happened just the same with or without my consent. Somehow the two magnets has charged the bio-electrical and chemicals like a capacitor of sorts.

My wife, she was always nervous when I was using the HDR, a fear of losing me forever! I understood her emotions at the time. Because I told her of my many different trips, astrally, physically, (that happened to me and both of us together.) So, she is a bit paranoid of the whole time travel devices. My SuperBeacon sent me to parallel universes with my full and unlimited access of my conscious mind. Still not quite good enough, I bought a IDL-12 about 9 Years ago, I had no idea that a person would be astrally projected with such a small box device. Yet, it happened just the same. But this was different because, my waking consciousness re-awakened myself outside our galaxy! This happen on my first afternoon of trying it out. That was the first time I ever was propelled into space that I was aware of.

Now from a year ago, I found a machine that can open up a huge or small and everything in-between in height or width of a scalar field. This one I don't have as of yet, I will get it in June or July of this year. I don't have as of yet the Scalar Generators each housed in their own suite case type box both the receiver and transmitter. But that didn't stop my partner, he did a rush order and purchased them both at the beginning of last year! My reasons of getting one are a bit different than his! He taken this device through paces in that same years time. This is second hand information, which is the best I can do, not having one to call my own.

We've kept in contact about his new scalar device each month or so. You can imagine I was anxious to see if what happened to the many owners in the UK could be duplicated. The short answer, "Yes"! Out of the many things happening to him month after month that seemed to miraculously happen, I found the crystal testimony was my pet peeve! Looking back, my friend and partner discussed what crystals supposively does ,when carrying it or holding it in our hands. We've both agreed crystals in general don't work for us, we seem to have an immunity with them! So, it was only fitting that our first experimental run would either prove or disprove that nagging doubts for the both of us. Remember, Crystal's are used in the HDR, yet it didn't affect me with or without it!

That first evening, he thought what the heck, he placed a clear quartz crystal he had and never worked for him, on to the plate of the "Receiver" . Before doing that step, he told me he was tuning the machines and somedays it will be 5 megahertz and tomorrow it might be 8 megahertz. Once this tuning was done and placing that crystal on the plate of the Receiver, the Tesla Coil would do its job running it. The Tesla Coils are both located under the plate and there antenna's are embedded inside each of the lids. He placed on both sides of his bend on a table, the receiver on one side and the transmitter on the other side. The distance between them was 6 feet. He went to sleep at 8:00 pm with the machine running in the "Natural" Scalar Mode. He was dreaming he told me, but these dreams were more complexed and very much life like.

If he didn't know any better, he would have no doubt been experiencing "Bi-Location. He was transported to a different earth realm! By 10:00 pm, he awakened suddenly and his back felt on the inside like static electricity along within his physical brain. From that point on, he was wide awake and supercharged in his own words. Now the "Cons", Still feeling energized, it was now 5:00 am and he has been awake since 10:00 pm! He had to call into work, he felt if this rubbed off during the day he would be so tired, he wouldn't be able to drive the forklift. By the time he was ready to go to sleep, he decided to take the crystal off the Receiver and just run the Natural Scalar mode. To his big surprise yet, he got up at 2:00 am fully awake minus the electrical static pricking all up and down his spine! He took that same crystal put it in his pocket, while at work, he told me his energy levels were skyrocketing! Remember at the start neither of us were crystal sensitives.

The experiment was in his own words was, "wow and weird" never knew in a million years that crystals could be that powerful if done with help!

I want to use the HDR in this scalar field opening. When 3 feet apart of both machines it causes a scalar field about three feet, it's like the size of a standard football. If placed at 75 feet each having the wall between the machines, it becomes the width and the height to an infinite size. Using the HDR, and my SE-51000 and using my new IDL-22 Gate Keeper along with my SuperBeacon, these would be used separately, each device I mentioned, would be used for about a week before moving on to another machine. My friend hasn't begun real testing as of yet. He will be in for a treagging pt! He used it on his aging parents and for the whole year he has been broadcasting to them, neither one got sick. Before this, his dad's arthritis was getting unbearable and his mom around her heart was weak.

Have a great one!
Thanks good reference read. On Area 51, I would keep out of there if I were you, because the gub has a device that picks up any time travel or displacement device. When the storm aera 51 movement was on, they had to remove the bin where parts of humans that were chopped up, the grays chemically fed on, out of there.

On ww lll, I don't know if this is going to occur or how big it will be? So this might translate into people taking their devices going into other times, without returning here. I will be going over your post a couple of times, because I'm getting over covid. Not sure 100% of what I read, so will be studying it for a while. Thanks so much for the nice reply, really apricate it.
 
ive built 2 of the 2 inch diameter electromagnets and wound 7.8 layers in reference to the 7.8hz Schuman resonance and our voltage is 240 vac 50 hertz and the design works perfect and when i tried iron it wouldn't work to well compared to the mild steel bar which was excellent and better and heat sinked well strange thing steel retains magnetism but i dont recal my steel bar electromagnet doing that when switched off and the iron one they sold me at the metal factory dident work i think if i remember it just kept blowing the fuse and my wire is double enameled coated from an engineering place and its not shorting out and the metal composition of that bar dident contain any magnetic fields only for a second before it kept blowing the fuse and it had no strength so that iron bar was the worcest one ive got and waisted all my wire winding it for nothing this iron bar looked like steel but they said it was iron had a slight grey color to it unlless when they sold me the mild steel bars that worked best they may be iron as you cant see any grey in this one iether so looked like steell but my electromagnets vibrated so much you could hear it before
 
Last edited:
the 50k potentiometers used are 500vdc rated sold by radio shack ive brought them online to and found them to be the same ones sold at jaycar electronics and they even have the same branding to
50k ohm 500vdc 0.5 watt not available anymore the only choice i see is to custom order it
 

Top